That makes more sense... Lots of electric ones now can be set to a certain temperature, only turning on when the temp drops below what you set it at. They are a lot more efficient. I wouldn't want it on 24/7 anyway, that would make my T room far too hot.Yeah i had a 1500 watt electric that raised it up that much, granted, it was ran 24/7
When trying to breed tropical species, it's better to have it warmer than what I'm comfortable with. When it's in the negatives or single digits (Fahrenheit) outside 3 months of the year my T room can dropped 10 plus degrees for many reasons. For example the windows need to be insulated because the cold pours in or a mindless spouse or roommate who messes with the house temps or say covers the heating vent for what ever reason like putting something over it because they weren't thinking (specific because that happened to me) If your not breeding and it's above 60F you shouldn't need a heating source unless you are trying to grow them faster...This is not directly heat mat related, but what really surprises me is all those people saying it's cold where they live, so they need an extra heat source for their Ts. I mean, of course it's cold - outside. I live in a pretty cold climate myself, but I don't need an extra heat source for my Ts, because my whole house is heated in winter (and fall, and spring...). I like a comfortable temperature in my house for myself, and I don't want to sit on my couch with a blanket or a wool sweater. Don't you guys heat your homes?
Well yeah, I think we've established there are specific use cases that are fine to use.Because of things like this
But also a testament to how resilient tarantulas can be.Because of things like this
Hahaha that is the perfect implementation of applying a human associated trait to an invert without being a victim of the title anthropomorphizingI don't use supplemental heat mats, but on chilly winter evenings when we turn on the gas fireplace, my tarantulas sometimes get to enjoy the warmth too. Once I had 4 enclosures lined up on the floor (no too close of course) and all 4 T's were angled against the sides with their bellies towards the heat. It was pretty darn cute. I try not to anthropomorphize, but pretty sure he was enjoying the moment. View attachment 241098
Well, i mean, what do you mean different "goals"?I don't recommend them because I'm cheap.
My spider room has dropped to 50 degrees for two week intervals. Even with a T.stirmi sling, I had no losses. I don't recommend it but, I think that you can get over zealous with temperature. If your specific goal is to have 100% controlled micro climate, then go for it. That is what great about this hobby.
everyone has different goals in this hobby and will consider their goals to be the same as everyone else, there for they have to abide by your rules.
Is the horse dead yet?
So not true (at least here on AB)...I've personally went through the steps to use a heat pad correctly several times (and have seen others post the same repeatedly)...basically just like the op uses....on top of that I regularly suggest a heat bath as a consistent and cheap heating alternative.I agree... The problem is these newbies are taught this without an alternative.
Now I read that you use some crazy heater, it sounds like something to hit with a baseball bat...but dang, I use an oil filled heater (like CEC) that runs non-stop from October until April (this year its been very cool, so its still running) and it adds basically 20-30 bucks a month.space heaters are brutal, they easily cost you an additional 150+ dollars a month
ding ding, we have a winner...most people want to stick them on the enclosure...that's the wrong way to use them for ts...that's how they are used for reptiles, which have significantly different heat requirements. Direct heat also draws them right to it, which is one of, if not the biggest danger a heat pad presents.The problem aren't heat mats. The problem is when people use them wrong
I can't get this either...sometimes I think the US is the only place that has furnaces and insulation...glad das Germans are up to datewhat really surprises me is all those people saying it's cold where they live, so they need an extra heat source for their Ts. I mean, of course it's cold - outside. I live in a pretty cold climate myself, but I don't need an extra heat source for my Ts, because my whole house is heated in winter (and fall, and spring...).
Its called a furnace...the ultimate backup plan every home should already have.What happens if your heater goes out, it'd be nice to have a back up just in case.
OP, you are using the pad the right way, taking a direct heat source and turning it into a secondary heat source, creating a micro-climate...its actually suggested here regularly.
So not true (at least here on AB)...I've personally went through the steps to use a heat pad correctly several times (and have seen others post the same repeatedly)...basically just like the op uses....on top of that I regularly suggest a heat bath as a consistent and cheap heating alternative.
Alternative uses for a heat pad and alternative heating options are constantly offered...the space heater is just the most common.
Now I read that you use some crazy heater, it sounds like something to hit with a baseball bat...but dang, I use an oil filled heater (like CEC) that runs non-stop from October until April (this year its been very cool, so its still running) and it adds basically 20-30 bucks a month.
ding ding, we have a winner...most people want to stick them on the enclosure...that's the wrong way to use them for ts...that's how they are used for reptiles, which have significantly different heat requirements. Direct heat also draws them right to it, which is one of, if not the biggest danger a heat pad presents.
I can't get this either...sometimes I think the US is the only place that has furnaces and insulation...glad das Germans are up to date...I'm baffled that cold climates of Scotland and England have homes that are consistently under insulated (or so they claim all the time)...I mean, who's the hack building homes there? Its cold consistently, build your domiciles to meet the cold requirements you absolutely positively know for a fact you will have each and every year.
I live in a super cold climate, like CEC, and if I were to build an un-insulated house with an inadequate furnace, it simply wouldn't pass inspection...in other words, it would not be considered fit for human habitation and you wouldn't be allowed to move in until it was rectified.
Often I feel like everyone over there lives in tends and caves the way they talk about the cold.
Its called a furnace...the ultimate backup plan every home should already have.
A heat... BATH? What in tarnation!OP, you are using the pad the right way, taking a direct heat source and turning it into a secondary heat source, creating a micro-climate...its actually suggested here regularly.
So not true (at least here on AB)...I've personally went through the steps to use a heat pad correctly several times (and have seen others post the same repeatedly)...basically just like the op uses....on top of that I regularly suggest a heat bath as a consistent and cheap heating alternative.
Alternative uses for a heat pad and alternative heating options are constantly offered...the space heater is just the most common.
Now I read that you use some crazy heater, it sounds like something to hit with a baseball bat...but dang, I use an oil filled heater (like CEC) that runs non-stop from October until April (this year its been very cool, so its still running) and it adds basically 20-30 bucks a month.
ding ding, we have a winner...most people want to stick them on the enclosure...that's the wrong way to use them for ts...that's how they are used for reptiles, which have significantly different heat requirements. Direct heat also draws them right to it, which is one of, if not the biggest danger a heat pad presents.
I can't get this either...sometimes I think the US is the only place that has furnaces and insulation...glad das Germans are up to date...I'm baffled that cold climates of Scotland and England have homes that are consistently under insulated (or so they claim all the time)...I mean, who's the hack building homes there? Its cold consistently, build your domiciles to meet the cold requirements you absolutely positively know for a fact you will have each and every year.
I live in a super cold climate, like CEC, and if I were to build an un-insulated house with an inadequate furnace, it simply wouldn't pass inspection...in other words, it would not be considered fit for human habitation and you wouldn't be allowed to move in until it was rectified.
Often I feel like everyone over there lives in tends and caves the way they talk about the cold.
Its called a furnace...the ultimate backup plan every home should already have.
A heat... BATH? What in tarnation!
This is some sorcery, details please.
This is cut from the last time I explained it....This is some sorcery, details please.
What about the sensitivity of the tarantulas receptors, which is extreme, to the idea that they are literally floating on a platform?This is cut from the last time I explained it....
Yeah, it works really well for smaller enclosures and its also probably the most economical way to heat enclosures that I have come across.
I basically took a tub, filled it with water. Submerged a platform (often just plastic containers filled with water and rocks) and placed another stable container on that platform.
I also put maybe an inch of water in this, and this is what will hold the enclosures.
Then you place an aquarium heater in the main basin (make sure it can stay submerged or it will crack) and set your temps and you are done. The only maintenance required is the replacement of the water due to evap to ensure the top platform remains submerged as well as your heater.
Its not floating, the enclosures are stable...if they aren't, it means there is too much water.What about the sensitivity of the tarantulas receptors, which is extreme, to the idea that they are literally floating on a platform?
Ahh, gotcha, less humorousIts not floating, the enclosures are stable...if they aren't, it means there is too much water.
The enclosure is no different than on a table except the bottoms are surrounded by warm water.