Trouble keeping humidity up

KrisThatBugGirl

Arachnopeon
Joined
Oct 17, 2023
Messages
18
I'm having trouble keeping the humidity levels to where they should be for my jumping spiders. I'm new to this so would appreciate your help. I'm going to try using some kind of reptile coconut substrate or something similar. I hope I don't invite mold, I just don't want it to be too dry for them even though they aren't molting. 20231019_173136.jpg
 

jbooth

Arachnobaron
Joined
Nov 24, 2022
Messages
495
Sounds good... it doesn't have to be wet substrate, a little moisture goes a long ways, dampen a corner or something.
 

Dry Desert

Arachnoprince
Active Member
Joined
Mar 9, 2016
Messages
1,598
I'm having trouble keeping the humidity levels to where they should be for my jumping spiders. I'm new to this so would appreciate your help. I'm going to try using some kind of reptile coconut substrate or something similar. I hope I don't invite mold, I just don't want it to be too dry for them even though they aren't molting. View attachment 458628
Stay away from Coco fibre substrate, it's crap and encourages mold.

If you want a moist environment use moss and lightly spray with dechlorinated water, normal tap water kills it.
 

spigy

Arachnopeon
Joined
Aug 18, 2021
Messages
24
I'm having trouble keeping the humidity levels to where they should be for my jumping spiders. I'm new to this so would appreciate your help. I'm going to try using some kind of reptile coconut substrate or something similar. I hope I don't invite mold, I just don't want it to be too dry for them even though they aren't molting. View attachment 458628
In my experience, it's good to keep regius on the drier side with good ventilation. Of course spritz a side of the enclosure with water every few days so she can get a drink.
 

Smotzer

ArachnoGod
Arachnosupporter +
Joined
Jan 17, 2020
Messages
5,451
They definitely don’t need “humid” or high moisture tank set ups
 

Ratmosphere

Arachnoking
Active Member
Joined
Aug 23, 2015
Messages
2,365
Depending on the enclosure size, a water bottle cap filled with water does the trick. Overflow it with water into the substrate so there's a section of the enclosure that stays damp.
 
Top