Hole size

[Ariel]

So, I've never really dealt with a T less then an inch in size and I'm second guessing the hole size I prepared for these slings. The slings are all about .75" and the drill bit I used was 1/16th. in your opinion, is that small enough?

 

[J.huff23]

When Im not sure if the holes are too big, I put the deli cup (or whatever the sling is in) and put it into another enclosure, normally a 10 gallon. That way if the sling gets out, it will just end up in the 10 gallon.

 

[xhexdx]

You want the holes to be smaller than the spider's cephalothorax.

 

[Offkillter]

I have a tiny A.versi and I used a three sixteenths bit and have had no problems.