Hole size

Ariel

Arachnoprince
Old Timer
Joined
Aug 2, 2009
Messages
1,421
So, I've never really dealt with a T less then an inch in size and I'm second guessing the hole size I prepared for these slings. The slings are all about .75" and the drill bit I used was 1/16th. in your opinion, is that small enough?
 

J.huff23

Arachnoking
Old Timer
Joined
Jun 23, 2007
Messages
3,001
When Im not sure if the holes are too big, I put the deli cup (or whatever the sling is in) and put it into another enclosure, normally a 10 gallon. That way if the sling gets out, it will just end up in the 10 gallon.
 

xhexdx

ArachnoGod
Old Timer
Joined
Jul 20, 2007
Messages
5,363
You want the holes to be smaller than the spider's cephalothorax.
 

Offkillter

Arachnosquire
Joined
Jun 18, 2010
Messages
149
I have a tiny A.versi and I used a three sixteenths bit and have had no problems.
 
Top